BKQXS - G-N METAL ASSEMBLY PASTE

  • MSDS: BKQXS
  • Manufacturer: DOW CORNING CORP
  • Product Name: G-N METAL ASSEMBLY PASTE
  • National Stock Number: 9150-01-290-4519
Product Identification

Product ID:G-N METAL ASSEMBLY PASTE
MSDS Date:06/11/1991
FSC:9150
NIIN:01-290-4519
MSDS Number: BKQXS

Responsible Party
DOW CORNING CORP
SOUTH SAGINAW RD
MIDLAND, MI 48686
US

Emergency Phone: 517-496-5900

Info Phone: 517-496-6000

Preparer: JACK L SHENEBERGER

Cage: 5D028

Contractor
DOW CORNING CORP
AUBURN, MI 48611 US

Telephone: 517-496-4388

Cage: 71984

Ingredients

MINERAL OIL, SLAB OIL

CAS: 8042-47-5

RTECS: PY8047000

Fraction By Weight: 48%

OSHA PEL 5 MG/M3 OIL MIST

ACGIH TLV: 5 MG/M3 OIL MIST


10 MG/M3

CAS: 1317-33-5

RTECS: QA4697000

Fraction By Weight: 17%

OSHA PEL SEE INGRED NAME

ACGIH TLV: SEE INGRED NAME


(SILICA, AMORPHOUS)

CAS: 7631-86-9

Fraction By Weight: 1%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3,TDUST


(ZINC PYROPHOSPHATE)

CAS: 7446-26-6

Fraction By Weight: 14%


(CALCIUM PHOSPHATE)

CAS: 7758-87-4

Fraction By Weight: 13%


(ETHYLENE-BIS-STEARAMIDE)

CAS: 110-30-5

Fraction By Weight: 3%


(TRIALUMINUM PHOSPHATE)

CAS: 13530-50-2

Fraction By Weight: 2%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: DIRECT CONTACT IRRIT
SLIGHTLY W/REDNESS & SWELLING. SKIN: A SINGLE RELATIVELY SHORT
EXPOSURE CAUSES NO KNOWN ADVERSE EFT. SEVERAL RPTD PRLNG EXPOSURES
(24-48 HRS) MAY IRRITATE. INHAL: IRRI TATES RESPIRATORY PASSAGES
SLIGHTLY. INGEST: SMALL AMOUNTS TRANSFERRED TO THE MOUTH BY FINGERS
DURING (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:HLTH HAZ: USE, ETC., SHLD NOT INJURE. SWALL LGE
AMTS MAY CAUSE DIGESTIVE DISCOMFORT. CHRONIC: NO KNOWN ADVERSE HLTH
EFTS, BUT UNNECESSARY EXPOSURE TO ANY CHEM SHOULD BE AVOIDED. THIS
PRODUCT MAY ENHAN CE ALLERGIC CONDITIONS ON CERTAIN PEOPLE. IF USE
CREATES RESPIRABLE PARTICLES, SOME RESP SYSTEM INJURY MAY OCCUR.
Medical Cond Aggravated by Exposure:NOT KNOWN TO THE MANUFACTURER.

First Aid

First Aid:EYES: FLUSH W/POTABLE WATER FOR AT LEAST 15 MIN, SEE MD .
SKIN: WIPE OFF & FLUSH W/WATER. WASH W/MILD SOAP SOLUTION OR
WATERLESS SKIN CLEANER. INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ARTF RESP). CALL MD IMMED . INGEST: GET MD
IMMEDIATELY .

Fire Fighting

Flash Point Method:OC
Flash Point:ABOVE 250F/121C
Extinguishing Media:WATER FOG, CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS SULFUR OXIDES FORM.

Accidental Release

Spill Release Procedures:REMOVE PRODUCT & USE ABSORBENT MATERIAL TO
TAKE CARE OF ANY OIL-LIKE RESIDUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID EYE AND SKIN CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL (GENERAL) RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:GOOD PRACTICE REQUIRES THAT GROSS AMOUNT OF ANY
CHEMICAL BE REMOVED FROM THE SKIN AS SOON AS PRACTICAL, ESPECIALLY
BEFORE EATING OR SMOKING.
Supplemental Safety and Health

Chemical Properties

HCC:V6
Vapor Pres:<5 MM.
Spec Gravity:1.38
Solubility in Water:<0.1
Appearance and Odor:VERY LITTLE ODOR, PASTE-LIKE, BLACK.
Percent Volatiles by Volume:<5(WT)

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Hazardous Decomposition Products:METAL OXIDES, SO*X, SILICON DIOXIDE,
CO*2, & TRACES OF INCOMPLETELY BURNED CARBON PRODUCTS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.